RELAY GENERAL SPECIFICATIONS
		ENVIRONMENTAL Working temperature, 0 to +60 deg C Functional temperature, -25 to + 70 deg C Storage temperature, -40 to +85 deg C Temperature Coefficient, 0.03% per deg C (300ppm/degC) Relative humidity, 95% non condensing Class of climate, HSE complying with DIN -3 complying with VDE/VDI 3540 INSULATION Test voltage, 4kV RMS 50Hz 1min between Input / Case /Auxiliary Impulse test, EMC 5kV transient complying with IEC801 / EN55020 HF interference test, EHF 2.5kv 1MHz complying with IEC 255-4 Protection class, II complying with IEC348 APPLIED STANDARDS General, IEC 144/ BS 5420/ VDE/ VDI 0435/ IEC 947/ EN60947 Safety, BS EN 61010 DIN 57411 / VDE 0411 ANSI C37 Surge withstand, IEC 801 / EN 55020 ANSI C37-90a Radio screening, RFI degree N complies with VDEO87S EMC Emissions EN50081-2 Immunity EN50082-1
			RELAY OUTPUT Relay type, dual pole change over Material, Silver / Cadmium Contact resistance, 200mOhm max, typically <5Om Ohm Rating AC, 250V 5A non resistive 12OOVA Rating DC, 125V 1A resistive 120 watts Electrical life, 1 x 10e6 at above load Mechanical life, 5 x 10e6 Operating time approx. 7ms (20ms max) Dielectric strength Between coil and contacts, 5kV RMS 1min Between open contacts, 1kV RMS Imin Between adjacent contacts, 1kV RMS imin Insulation resistance, 1000M Ohm at 500V DC Operating temperature, -30 to + 75 deg C Approval UL and CSA recognised ENCLOSURE Fixing Snap on to DIN rail 35 x7.5 mm complies with DIN-EN 50022 BS 5584 Mounting Any position. Enclosure Code Case IP50, terminals IP30 Complies with IEC 529 BS 5490 DIN 40050 Material Complying with UL94 VO APPROVALS U.L. Approval File No E157034