INPUT
Rated Un Directly coupled 10V to 415V L.N. (17 V to 720V L.L.)

Standard voltages offered :-
415V L-N, 720V L-L
Maximum Voltage 415V L-N, 720V L-L

Burden 0.5VA per phase

Rated In 5 amp (1A option)
Range 5-120%
Burden 0.5VA per phase
Overload 2 x In continuous
Frequency 50 / 60 Hz nominal range 45/65Hz

SYSTEMS
Single phase
Single phase 3 wire
3 phase 3 wire unbalanced load
3 phase 4 wire unbalanced load

ACCURACY
Class 1:
1% +/- 2 digits (Voltage Ranges 415V L-N and 720V L-L)
1% +/- 2 digits (Current Ranges 5A or 1A)


APPLIED STANDARDS
General IEC 688 BSEN60688, BS4889, IEC 359
EMC Emissions BSEN50081/2
Immunity BSEN50082/2
Safety IEC 1010, BSEN601010

INSULATION
Test Voltage 3 kV RMS 60 Hz for 1 min between input / case /auxilliary
Impulse Test EMC 5kV transient complying with IEC 801 / EN 55020
HF interference EHF 2.5 kV 1 MHz complying with IEC 255-4
Protection Class II complying with IEC348 / BS4753 / DIN 57411 / VDE 0411

AUXILIARY (dual)
Standard AC auxilliary: 230V/400V
Options
57.7/100V,63.5/110V,69/120V,120/208V,120/277V,254/440V,277/480,346/600V
ALL ± 15% 45 to 65Hz
Burden < 7 VA

DC Option:
12, 24, 30, 48, 110, 125, 220 Volt
(±15%)

PARAMETERS DISPLAYED
Volts L-L: L1-L2,L2-L3,L1-L3
Volts L-N: L1, L2, L3
Amps: L1,L2,L3, Neutral Current
Frequency: System frequency
Peak Demand: Amps, L1, L2, L3
Time: Hours Run

ENCLOSURE
DIN 96 x 96 x 98 mm
Mounting TerminalsVia 4 retaining brackets
Panel Cutout 92 + 0.8 mm x 92 + 0.8 mm
Material Black Polycarbonate UL94 VO
Terminals Screws for 2 x 0.5-5 mm
IP Rating front IP54 / NEMA 4
IP Rating terminals IP54 / NEMA 4
Weight 0.5 kg (1.1 lb )

APPROVALS
UL, C-UL, CSA


CONTROLS
Two front controls for scrolling up or down, through parameters being displayed.
Used for programming.

DISPLAY
Display: Red LED (software adjustable brightness)
Digits: 3 lines x 4 digits
Digit Size: 7 Segment - 14.2mm high