|
INPUT
Rated Un
Direct connected voltages between 57.8 and 600 V.
Standard
voltages offered :-
Three phase
four wire
63.5/110 V, 69.3 / 120 V, 120 / 208 V, 220/380 V, 230 / 400 V, 240
/ 415 V,
277 / 480V
Three
phase three wire
110 V, 120 V, 380 V, 400 V, 415 V, 440 V, 480 V
Range 5-120% Un
Burden 0.5VA per phase
Overload 1.5 x Un
continuous, 4 x Un for 1 second
Rated In 1
or 5 amp
Range 5-120%
Burden
0.5VA per phase
Overload 4 x In continuous,
50 x In for 1 second
Frequency 50 / 60
Hz nominal range 45/65Hz
SYSTEMS
Single phase
Single phase 3 wire
3 phase 3 wire unbalanced
load
3 phase 4 wire unbalanced
load
ACCURACY
Volt 0.5% of reading
± 2 digit
Amps
0.5% of reading ± 2 digit
Frequency 0.1Hz ±
1 digit
PowerFactor 1% of
reading ± 2 digit
Active Power 1% of
reading ± 2 digit
Reactive Power 1%
of reading ± 2 digit
Active
Energy 1% of reading (IEC 1036)
Reactive Energy 1%
of reading (IEC 1036)
Apparent power 1%
of reading ± 2 digit
Demands 1% of reading
±2 digit
THD 1.5% of range V and I
APPLIED STANDARDS
General IEC 688 BSEN60688,
BS4889, IEC 359
EMC Emissions BSEN50081/2
Immunity BSEN50082/2
Safety IEC 1010,
BSEN601010
INSULATION
Test Voltage 3 kV
RMS 60 Hz for 1 min between inputs / case / relay output. ( 2.5kV
between RS232 output / inputs / case /relay )
Impulse Test EMC
5kV transient comply with IEC 801 / EN 55020
HF interference EHF
2.5 kV 1 MHz comply with IEC 255-4
Protection Class
II complying with IEC348 / BS4753 / DIN 57411 / VDE 0411
AUXILIARY
AC 110 /120/220/230/277
V (± 15% ) 45 to 65 Hz
Burden
< 7 VA
DC 12/24/30/48/110/130/220 V (±15%)
DISPLAY
Display: Red LED
(software adjustable brightness)
Digits:
3 lines x 4 digits
Digit
Size: 7 Segment - 14.2mm high
|
