The M850 (MultiPower) is a complete 3 phase digital universal metering system in a standard 96 x 96 mm DIN case. It can be used on any voltage system with wide range on inputs. The auxiliary supply is a universal supply for both AC & DC volts. The one unit covers the majority of application without any modification required, which makes M850 ideal for stocking.

The M850 measures Volts, Amps, Neutral Current, Frequency, Active Power, Apparent Power, Reactive Power, Active Energy, Reactive Energy, Power Factor, Amp Demand, Apparent Power Demand, Active Power Demand, Maximum Amp Demand, Maximum Apparent Power Demand and Maximum Active Power Demand.

The M850-MP1 can be used on the following measuring systems without any changes apart from wiring configuration.
Single Phase,
Single Phase 3 wire
3 Phase 3 Wire Balanced Load
3 Phase 4 Wire Balanced Load
3 Phase 3 Wire Unbalanced Load
3 Phase 4 Wire Unbalanced Load

Product code:
M850-MP1

The M850 is designed to be user friendly and simple to use. All operations, including programming are performed by using the four push buttons on the front of the instrument.
M850 units are pre-programmed by the factory and no further programming is necessary. However, a user can reprogram most parameters in an M850
e.g. nominal current and voltage inputs, relay output etc