MultiPanel Meter

MultiPanel (M814)

Download brochure


M814 Introduction

The MultiPanel is a low cost three phase digital meter in a standard DIN 96 x 96 mm case, measuring the basic electrical parameters.
The standard unit can be used on any wiring system and any voltage between 10V to 415V LN (17V to 720V LL)
The MultiPanel is simple to use and is an ideal replacement for analogue meters.

Parameters Measured
* Voltage (V)
* Current (I)
* Frequency (Hz)
* Maximum Demand Amps
* Neutral Current
* Hours Run

When ordering specify M814-VAH current and which dual auxiliary voltage is required
e.g. M814-VAH 5A 230/400V


Input (accuracy range)
Rated Un:
Directly coupled 10V to 415V L-N. (17V to 720V L-L)
Standard voltages offered :- 415V L-N, 720V L-L
Maximum Voltage 415V L-N, 720V L-L
Burden 0.5VA per phase

Rated In:
5 amp (1A option) Range 5-120%
Burden 0.5VA per phase

Frequency 50 / 60 Hz nominal range 45/65Hz

Overload 2 x In continuous

Class 1:
1% +/- 2 digits (Voltage Ranges 415V L-N and 720V L-L)
1% +/- 2 digits (Current Ranges 5A or 1A)
Auxiliary Voltage
Standard AC auxilliary: 230V/400V
Options: 57.7/100V, 63.5/110V, 69/120V, 120/208V, 120/277V, 254/440V, 277/480, 346/600V ALL ± 15% 45 to 65Hz
Burden < 7 VA
DC Option: 12V, 24V, 30V, 48V, 110V, 125V, 220V (±15%)

Single phase
Single phase 3 wire re
3 phase 3 wire unbalanced load
3 3 phase 4 wire unbalanced load

Red LED (software adjustable brightness)
Digits: 3 lines x 4 digits
Digit Size: 7 Segment - 14.2mm high

Test Voltage:
3 kV RMS 60 Hz for 1 min between input / case /auxilliary
Impulse Test:
EMC 5kV transient complying with IEC801/EN55020
HF interference:
EHF 2.5 kV 1 MHz complying with IEC255-4
Class II complying with IEC348/BS4753/DIN57411/VDE 0411

Working Temperature -20 to +60 °C
Storage Temperature -40 to +85 °C
Temperature Coefficient 0.01% per °C
Relatively Humidity 0-95% non condensing
Warm up time 1 min.
Shock 30g in 3 planes
DIN 96 x 96 x 98 mm
Mounting TerminalsVia 4 retaining brackets
Panel Cutout 92 + 0.8 mm x 92 + 0.8 mm
Material Black Polycarbonate UL94 VO
Terminals Screws for 2 x 0.5-5 mm
IP Rating front IP54 / NEMA 4
IP Rating terminals IP54 / NEMA 4
Weight 0.5 kg (1.1 lb )


Applied Standards
General IEC 688 BSEN60688, BS4889, IEC 359 EMC
Emissions EN61326-1
Immunity EN61326-2
Safety EN61010-1

Measurements Displayed
Volts L-L: L1-L2,L2-L3,L1-L3
Volts L-N: L1, L2, L3
Amps: L1,L2,L3,
Neutral Current
Frequency: System frequency
Peak Demand: Amps, L1, L2, L3
Time: Hours Run