M550/M560 Monitoring Channels' Assignment

Structure byte 11

Read/Write

Any one of the M550/M560's channels can be set up to monitor one of several input measurements.
One value from the table below can be entered in the structure's byte position 11 to assign the relay, or read from it.

Value Parameter
1       Volts (V)
2       Current (A)
3       Frequency (Hz)
4       Power (W)
5       Reactive Power (VAr)
6       Apparent Power (VA)
7       Reverse Power (-W)
8       Reverse Reactive Power (-VAr)
9       Phase/Line voltage difference (Vbal)
10     IMPORT Watt Demand (Wd)
11     EXPORT Watt Demand (-Wd)
12     VA Demand (Vad)
13     A Demand (Ad)
14     Energy Import W.h
15     Energy Export W.h
16     Energy Import VAr.h
17     Energy Export VAr.h
18     Energy VA.h
19     Energy A.h

There is error checking, and values outside the above range result in an ILLEGAL DATA error code being returned.

Write Code Example
Read Code Example