M100-AL1 AC Current Transducer

£ 60.00£ 70.00

The M100-AL1 is an average sensing, RMS calibrated, live zero current transducer.

A full range of transducers is available on our main site. For enquiries please contact sales@multitek-ltd.com 

Clear

Description

The M100 series current transducers are designed to measure A.C. current in single and three phase systems. They convert the A.C. signal to a D.C. output that is directly proportional to the input signal. The M100-AL1 is an average sensing, RMS calibrated, live zero current transducer. Auxiliary is required to provide power to enable a 4mA output signal when the input poes to zero. It can be used to measure current in energy management systems, switchboards, generator and telemetry controls.

Isolation of 4kV is provided between the input and output, allowing the output to be fed to conventional analogue meters, digital meters, PLC, and computer systems.

A full range of transducers is available on our main site. For enquiries please contact sales@multitek-ltd.com 

Additional information

Weight 0.38 kg
Dimensions 12 × 6.5 × 8.5 cm
Input Current

1A, 5A

Auxiliary Voltage

57.7V AC, 63.5V AC, 69.3V AC, 120V AC, 139V AC, 220V AC, 230V AC, 240V AC, 277V AC, 380V AC, 400V AC, 415V AC, 24V DC, 48V DC, 110V DC, 125V DC
 

Input Frequency

50Hz, 60Hz

Specification

Input

Rated value In 1 or 5 Amp C.T. connected
0.5-10 Amp direct connected
Power consumption <0.2 VA 
Working range 0-125%
Rated Frequency 50 / 60 / 400 Hz
Frequency influence 0.005 % / Hz
Overload continuous 4 x In
Overload for 1 sec. 50 x In 

Output

Rated value mA 4-20mA 

Adjustments

Zero ± 2%
Span ± 10%

Auxiliary

A.C. Voltage 115/230/400V (± 25%/45-65Hz/<2VA)
D.C. Voltage 24/48/110V (± 20%/galvanically isolated/<3 W)

Weight and Case

M100-AL1,AR1 Approx. 0.4 kg. 55mm case

Downloads

Brochure (Whole Range)

Full Product Range

Current, Voltage, Watts, Vars, Frequency, Power Factor, DC to DC, Resistance, Tap Position, RTD Temperature, Thermocouple Temperature.