Description
The M250-TRC converts the output from the M240-RCM MultiCoil (Rogowski coil) to either a DC or AC output which is directly proportional to the AC current being measured by the MultiCoil. Available DC outputs are 0-1mA, 0-5mA, 0-10mA, 0-20mA, 4-20mA, 0-5V, 0-10V, 1-5V DC. This product is also available with an output of 0-333mV AC.
Power Supply
Supply: 75-277V AC, 20-56V DC, 12V DC
Frequency: 50/60Hz operation, 400Hz Option
Isolation: 4kV between power supply and input/output. Output is not isolated from input until the coil is connected. The coil provides isolation.
Outputs
DC mA:
0-1mA <12kOhm
0-5mA <2.4kOhm
0-10mA <1.2kOhm
0-20mA <600Ohm
4-20mA 1kOhm
0-10V >1kOhm
1-5V >1kOhm
AC Volts: 0-333mV AC
General
Ambient Temp: -20 to +70°C
Relative Humidity: 95%
Houseing: UL94V0
Mounting: Din Rail (35mm)
Accuracy: 1% over measurement range
Cut off: 10A on lowest range
Minimum Full Span: 100A